Fly Wing H1-Heli, Руководство пользователя

Страница: 16 / 25

H1 user manual
The error message can be displayed below the main interface connection，When the aircraft is abnormal, it
can not be powered off，Connect the computer to view the error message and correct it（See the common
errors and solutions section for solutions). After installing the new helicopter, the tail gain and throttle value
can be set in the main interface
2.Main rotor adjustment
After installing the new helicopter，the transmitter mode is in 3D.
You can reset the swash plate and pitch on this page.Click the servo to return to the center，The current servo
angle can be adjusted by three progress bars,Until the swash plate is level（Vertical to the front and side of
the main shaft)Then click the adjustment to complete the adjustment of the positive and negative pitch in
pitch adjustment. The recommended setting is ±12 degrees.