Fly Wing H1-Heli Скачать руководство пользователя страница 21

H1 user manual

*

One-key acrobatic

Flywing has designed one key switch Normal /Invert mode for users. In inverted mode, GPS can still fly at fixed point and
fixed altitude, providing users with a good acrobatic training platform.

When using this function, the aircraft will switch between forward flight

and backward flight according to a two-stage switch of the transmitter.
When the aircraft is in forward flight, the switch will switch to

backward flight, and the helicopter will automatically roll to

backward flight, and hover

The HOME function will be invalid on invert mode

Please note the battery voltage.This function can be used
only when the 9-channel switch of the transmitter is set as
one key fly back switch by the parameter adjustment software,
and the height is more than 10 meters above the ground

There are two modes :

simple inverted mode and expert inverted mode.

simple inverted mode:
This mode is suitable for novice , and can quickly experience the fun of reverse flight. It needs to be set in the
parameter adjustment software. When the reverse flight switch is turned on, the helicopter will automatically
roll to inverted flight and hover at fixed point by GPS. At this time, the user's operation mode is the same as
that of forward flight. (if the throttle stick is pushed upward, the helicopter will climb upward. If the elevator
stick is pushed forward, the helicopter will move towards the nose).

Expert inverted mode
This mode is suitable for 3D stunt training operation, and can be used for basic hovering operation of 3D
stunt assisted by GPS. It needs to be set in the parameter adjustment software. When the reverse flight
switch is turned on, the helicopter will automatically roll to inverted flight and hover at fixed point by GPS. At
this time, the operation mode of the helicopter is the same as that of 3D stunt.
(push the throttle stick upward, the helicopter will descend, and if the elevator stick move forward, and the
helicopter will move towards the tail.)

This function is a test function. Due to the different performance and power of each helicopter, the rolling

effect will be slightly different. By default in the software ,If the height of the helicopter is less than 10 meters
above the ground, this function cannot be turned on.

In GPS mode, if the satellite signal is not good, the plane will not be able to take off, please move it to

the open space.

Manual mode, if the satellite is not good enough to take off, but it can not guarantee the accuracy of the
return point. If the GPS signal is still bad after take-off, the GPS mode will be invalid and remain in the
current mode.

Содержание H1-Heli


























Отзывы: