16
TS44DLX Deluxe Test Set
Users Guide
bfp04.eps
Figure 4. Battery Replacement
Replacing or Relocating the Belt Clip
See Figure 5.
The belt clip assembly is field replaceable in the event
of damage or prolonged wear. It also can be relocated
to one of two locations. To order a replacement belt
clip, contact your local Fluke Networks authorized
distributor.
To replace or relocate the belt clip assembly:
1
Use a Phillips screwdriver to remove the screw that
secures the belt clip to the test set housing at the
keypad end.
2
Remove the old belt clip and replace with a new
one. Secure the belt clip assembly to the test set
housing with the original screw.
bfp05.eps
Figure 5. Belt Clip Replacement
To install a second belt clip:
1
Remove the blank insert from the test set.
2
Place the belt clip on the test set and secure with
the screw supplied with the belt clip.
3
Place the blank insert in the belt clip slot that is not
being used.
Replacing the Line Cord
A worn out or damaged line cord can be replaced by
the user. To obtain a replacement line cord, contact
your local Fluke Networks authorized distributor.
W
Warning
Read all instructions completely and
understand possible hazards to end user if
repairs are not performed properly.
Disconnect test set clips from any metallic
connections before performing this
maintenance.
