Fluke OMNIFiber Скачать руководство пользователя

Страница: 32 / 136

2 - 7

OMNIS

CANNER

User Guide

unselect the graphs to be saved. (See Chapter
4 - Setup:

Autotest Save Options

for more

information.)

Press

(Save) to save the settings and

return to the

SAVE AUTOTEST

Screen

7. The

SAVE AUTOTEST

screen’s save function

key indicates the selected Save Option.

Press

(Save) to save the test results to

OMNIS

CANNER

’s internal memory.

Press

(Save with Graphs) to save the

test results with their graphs to OMNIS

CANNER

’s

internal memory.

Note

Saving graphs will reduce the number of
Autotests that can be stored.

Press

(Save to MMC) to save the test results to the

MultiMediaCard. (OMNIS

CANNER

2 only.)

Press

(Save with Graphs to MMC) to save the test results with

their graphs to the MultiMediaCard. (OMNIS

CANNER

2 only.)

Note

Saving graphs will reduce the number of Autotests that can be
stored.

8. Press ESC to return to the Autotest screen without saving the
Autotest.

9. To run the next Autotest press the

key.

Viewing Twisted Pair Autotest Results

This viewing option is only available immediately after the Autotest
was performed.

Содержание OMNIFiber









































































































































Результаты поиска

Содержание OMNIFiber

Отзывы:

Похожие инструкции для OMNIFiber

Бренды по названию

Популярные бренды

Fluke OMNIFiber, Руководство пользователя

Результаты поиска

Содержание OMNIFiber

Отзывы:

Похожие инструкции для OMNIFiber

Бренды по названию

Популярные бренды