Fluke MicroMapper Pro Скачать руководство пользователя

Страница: 2 / 20

MicroMapper Pro VDV Cable Tester (MMP-50)

•

MicroMapper Pro VDV tester with 6 AAA batteries

•

Remote identifier #1

•

F-connector barrel adapter

•

MicroMapper Pro Instruction Sheet

Safety Information

Warning

To avoid possible fire, electric shock, or personal injury:

•

Do not open the case; no user-serviceable parts are inside.

•

Do not modify the tester.

•

Do not use the tester if it is damaged. Inspect the tester before
use.

•

Do not run a test with cables connected to both connectors on
the tester. Doing so may affect length measurements.

•

If this equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be
impaired.

Warning or Caution: risk of damage or destruction to equipment
or software. See explanations in the manual.

Warning: Risk of electric shock.

This equipment not for connection to public communications
networks, such as active telephone systems.

Do not put products containing circuit boards into the garbage.
Dispose of circuits boards in accordance with local regulations.

Содержание MicroMapper Pro





















Результаты поиска

Содержание MicroMapper Pro

Отзывы:

Похожие инструкции для MicroMapper Pro

Бренды по названию

Популярные бренды

Fluke MicroMapper Pro, Инструкция

Результаты поиска

Содержание MicroMapper Pro

Отзывы:

Похожие инструкции для MicroMapper Pro

Бренды по названию

Популярные бренды