Fluke MicroMapper Pro, Инструкция

Страница: 10 / 20

Results for coaxial cable.
Remote ID #3 detected.
Results for terminated coaxial cable. The tester
shows the total resistance of the cable and
terminator. Length cannot be measured on
terminated cable.
Table 2. Fault Results: Remote Identifier Optional
Short between wires 1 and 2.
The display shows the shorted wires and whether
the short is at the near end (
NEAR-END
) or far end
(
FAR-END
) of the cable.
For a short greater than 0
Ω
, the displayed length
is greater than the actual distance to the short.
Short to the shield. For shielded cable (
FTP
) the
shield is shown as
H
.
The display shows the wire shorted to the shield
(wire 3 in this example).
-continued-
Table 1. Test Results for Good Cable (continued)