Fluke 9640A Series, Инструкция по эксплуатации

Страница: 82 / 324

9640A
Instruction Manual
3-34
Additional notes regarding good practice when sourcing and measuring high- and low-
level signals are given at the end of this chapter.
Use the following procedure to connect a Leveling Head to a UUT:
1.
Read and observe all of the preceding Cautions and Warnings.
2. Remove the plastic connector protection caps form the cable-end connectors and save
them for future use.
3. Connect the N-connector on the Leveling Head to the input of the UUT.
4. Torque the N-connector to 1.00 Nm (9 in-lb) using an N-connector torque wrench.
The torque wrench is available as an accessory; see Chapter 1,
Options and
Accessories .
Using the Save/Recall Function
The Save/Recall function provides the user with a way to save and recall up to 10 groups
of settings associated with the instrument setup and/or the output signal.
Each memory group has a default name,
SLOT-1
through
SLOT-10
, and is accessible
from the
Instrument Setup
screen. From this screen, the user can do the following:
•
Save the present Instrument or output signal settings to a selected slot
•
Recall previously saved instrument or output signal settings from a selected slot
•
Rename a selected memory slot to something more meaningful
•
Delete all setting information from a selected memory slot
ead11f.bmp
Save/Recall Screen
Accessing the Memory Screen
To access the
Save/Recall
screen press

. When the screen initially comes up it is
ready to perform save/recall operations on the selected (
SLOT-1
) memory. These
operations include Rename, Delete, Save Instrument, Save Mode, and Recall Settings. A
description of each operation follows: