Fluke 9009, Руководство пользователя

Страница: 27 / 30

Industrial Dual-Block Calibrator
Maintenance
23
Accuracy and Repeatability
Check the accuracy of the Product at various points over the calibrated range. If the Product does not
pass specification at all set-points, repeat the
Calibration Procedure .
Maintenance
With proper care, the Product requires very little maintenance. Refer to Safety Information .
• If the outside of the instrument becomes soiled, wipe it clean with a damp cloth and mild detergent.
Do not use harsh chemicals on the surface which can damage the paint.
• Keep the well of the calibrator clean and clear of any foreign matter. Do not use fluid to clean out the
well.
• Handle the Product with care. Avoid knocking or dropping the instrument.
• If a hazardous material is spilled on or inside the Product
, take the appropriate decontamination
steps as outlined by the national safety council with respect to the material.
• Periodically buff the removable probe sleeves clean to prevent dust and carbon material build up.
• If a sleeve is dropped, examine the sleeve for deformities before you insert it into the well. If there is
any chance of jamming the sleeve in the well, file or grind off the protuberance.
• Do not slam the probe stems into the well. This can cause a shock to the sensor.
• If a hazardous material is spilled on or inside the Product, take the appropriate decontamination
steps as outlined by the national safety council with respect to the material.
• If the mains supply cord becomes damaged, replace it with a cord with the appropriate gauge wire
for the current of the Product. If there are any questions, see Service Information .
• Before the use of any cleaning or decontamination method except those recommended by Fluke
Calibration, check with an Authorized Service Center to be sure that the proposed method does not
damage the Product
.
Troubleshooting Problems, Possible Causes, and Solutions
If the Product functions abnormally, Table 4 may help to find and solve the problem. Several possible
problem conditions are described along with likely causes and solutions. Please read this section
carefully and attempt to understand and solve the problem. If the problem cannot otherwise be solved,
contact an Authorized Service Center (see
Service Information ). Be sure to have the model number
and serial number of the Product available.