9009
User’s Guide
8
Temperature Set-point
Set the temperature set-point to any value within the range and resolution as given in the
specifications. Do not exceed the safe upper temperature limit of any device inserted into the well.
To set the temperature
,
select the set-point memory and adjust the set-point value.
Programmable Set-points
The controller stores eight set-point temperatures in memory. Quickly recall the set-points to
conveniently set the calibrator to a previously-programmed temperature set-point.
To set the temperature
,
select the set-point memory first. Push
SET
to access this function from the
temperature display function. The number of the current set-point memory shows at the left on the
display followed by the current set-point value.
100.0 C
Well temperature in degrees Celsius
Push
SET
Access set-point memory
1 100.
Set-point memory is currently set to 1 101
°
C
To change the set-point memory push
UP
or
DOWN
.
4 300.
New set-point memory is 4 300
°
C
Push
SET
to accept the new selection and access the set-point value.
Set-point Value
To adjust the set-point after you select the set-point memory, push
SET
.
4 200.
Set-point 4 value in
°
C
If the set-point value is correct, push
EXIT
to show the well temperature. Push
SET
and then push
UP
or
DOWN
to adjust the set-point value.
220.00
New set-point value
When the controller reaches the desired set-point value
,
push
SET
to accept the new value and to
access the temperature scale units selection. If you push
EXIT
instead of
SET
, any changes made to
the set-point are ignored.
Push
SET
Accept new set-point value
