RHapid-Cal Humidity Generator
General Specifications
5
General Specifications
AC mains voltage................................................ 100 V to 240 V
±
10 %, 47 to 63 Hz
Power consumption ............................................ 300 VA
Required test fluid ............................................... Distilled water
Warm-up period to meet specifications .............. Twice the time since last warmed up, to a maximum of 30 minutes
Internal humidifier warm-up period
(time for “HEATING” to go off) ............................ 30 minutes (Typical)
Mains Fuse Rating .............................................. F 4A 250 V (fast blow)
Operating ambient relative humidity range,
18
°
C to 28
°
C .................................................... Up to 80 % RH
Storage temperature and relative humidity ......... -20
°
C to 50
°
C, 0 % to 95 % RH, non-condensing
Transducer Power Output ................................... 12 V dc, 1 A maximum, fuse: F 1A 250V (fast blow)
Computer Interface… ......................................... USB
Safety .................................................................. IEC 61010-1, Installation Category II, Pollution degree 2
,
Indoor use only
Altitude ................................................................ 2000 m
Electromagnetic Compatibility (EMC)
International ........................................................ IEC 61326-1: Controlled Electromagnetic Environment
CISPR 11: Group 1, Class A
Group 1: Equipment has intentionally generated and/or uses
conductively-coupled radio frequency energy that is necessary for
the internal function of the equipment itself.
Class A: Equipment is suitable for use in all establishments other
than domestic and those directly connected to a low-voltage power
supply network that supplies buildings used for domestic purposes.
There may be potential difficulties in ensuring electromagnetic
compatibility in other environments due to conducted and radiated
disturbances.
Caution: This equipment is not intended for use in residential
environments and may not provide adequate protection to radio
reception in such environments.
Emissions that exceed the levels required by CISPR 11 can occur
when the equipment is connected to a test object.
Korea (KCC) ....................................................... Class A Equipment (Industrial, Broadcasting, & Communication
Equipment)
Class A: Equipment meets requirements for industrial
electromagnetic wave equipment and the seller or user should take
notice of it. This equipment is intended for use in business
environments and not to be used in homes.
USA (FCC) .......................................................... 47 CFR 15 subpart B. This product is considered an exempt device per
clause 15.103.
Weight
Chassis only ....................................................... 15 kg (33 lbs)
Dimensions
Chassis ............................................................... 237 mm x 432 mm x 521 mm (9.3 in x 17 in x 20.5 in) (height x width x depth)
Overall Chamber Dimensions ............................. 200 mm (7.87 in) (depth) x 150 mm (5.90 in) (diameter)
Working Volume Dimensions .............................. 109 mm (4.3 in) (depth) x 125 mm (4.88 in) (diameter)
Temperature resolution:
Display ................................................................ 0.1
°
C
USB data ............................................................ 0.1
°
C
Humidity resolution:
Display ................................................................ 0.1 % RH
USB data ............................................................ 0.1 % RH
Dew Point
Resolution ........................................................... 0.1
°
C (for indication only)