RHapid-Cal Humidity Generator
Safety Information
3
•
Use only the mains power cord and connector approved for
the voltage and plug configuration in your country and rated
for the Product.
•
Replace the mains power cord if the insulation is damaged
or if the insulation shows signs of wear.
•
Make sure the ground conductor in the mains power cord is
connected to a protective earth ground. Disruption of the
protective earth could put voltage on the chassis that could
cause death.
•
Use the Product only as specified, or the protection
supplied by the Product can be compromised.
•
Do not put the Product where access to the mains power
cord is blocked.
•
Do not use the Product if it is damaged.
•
Disable the Product if it is damaged.
•
Do not use the Product if it operates incorrectly.
•
Do not operate the Product with covers removed or the case
open. Hazardous voltage exposure is possible.
•
Use only specified replacement parts.
•
Use only specified replacement fuses.
•
Have an approved technician repair the Product.
•
Empty the reservoir before shipping the Product.
•
Do not overfill the reservoir.
For safe operation and maintenance of the Product:
•
Turn off the Product and remove the mains power cord.
Stop for 2 minutes to let the internal circuits discharge
before you open the fuse door or remove Product covers.
