Fluidwell F133-P, Руководство пользователя

Страница: 9 / 48

FW_F133P_v1702_02_EN
Page 9
2.4. DISPENSER FUNCTIONAL DIAGRAM
The function of the F133-P depends on the different settings in the setup menu. The example is
given for a typical configuration.
START THE DELIVERY
PAUSE / STOP THE DELIVERY (pause is enabled)
STOP THE DELIVERY (overrun timer is set)
LEGEND
:
I: Idle, waits for new delivery.
A : Start, the START key is pushed to start a new delivery, the F133-P will reset itself.
B : Delay, time for the pump to start up.
C : Begin, pump is at delivery speed.
D : Startup, valve opens to build up the flow, flow detection is active.
E : Started, flow is present at required rate.
F : Not started, there is no flow or the flow is not sufficient, the valve closes and the display shows
NOT STARTED.
Pump, stopped Timer, predefined by software
Pump, running 61
Timer, set by setup menu
CONTROL
Valve, closed Flow OK, restart timer active
Valve, open Flow NOK, restart timer elapsed
Reset, predefined by software