HF132PEN_v0501_05
Page 17
HEADER
82
Each receipt starts with a 16 character upper case text header. To
customize the header text do the following:
•
Press
PROG
briefly;
PROGRAM
starts blinking
•
Optionally
press
▲
and
►
simultaneously to blank the header and/or
•
Place the cursor over a character location by repeatedly pressing
►
;
The cursor is indicated by a blinking character.
•
Press
▲
to change the character on the cursor location;
PROGRAM
will
be displayed steady
•
Press
▲
and
►
simultaneously to blank the character on the cursor
location or press a combination of
▲
and
►
to select a new character.
The following character set can be chosen from:
_
*
– 0 1 2 3 4 5 6 7 8 9 A B C
D E F G H I J K L M N O P Q R S
T U V W X Y Z
•
Press
ENTER
to confirm the selection;
PROGRAM
starts flashing
•
Use
►
to place the cursor over the next character location and
repeat
above steps until all characters are changed
•
Press
ENTER
again
to store the new header;
PROGRAM
goes off.
Notes
:
•
A blinking underscore
_
represents a space, not an underscore!
•
Arrows in the display indicate more header text to the left or right.
•
Pressing
▲
and
►
simultaneously clears the header or character
LINETERMINATION
83
Define here what the printer should do to terminate a printed line.
The following options can be selected:
CR/LF - CR - LF
CR causes a carriage return, but no line feed. LF causes a line feed, but
no carriage return. Choose CR/LF to get both (default).
STARTROW
84
Enter a number of empty lines to advance before printing the receipt.
0 - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9
ENDROW
85
Enter a number of empty lines to advance after printing the receipt.
0 - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9
FORMFEED
86
Select
enable
if a form feed has to be given each time a receipt is printed. If a
form feed is not required select
disable
.
DATEFORMAT
87
Select the format in which the date is to be printed and displayed.
Y.M.D – D.M.Y – M.D.Y
9 - OTHERS
TYPE OF MODEL
91
For support and maintenance: provide this information to your supplier.
(cannot be changed)
VERSION SOFTWARE
92
For support and maintenance: provide this information to your supplier.
(cannot be changed)
SERIAL NUMBER
93
For support and maintenance: provide this information to your supplier.
(cannot be changed)
TIME
94
Enter the correct time of the system clock. The format is
HH.MM.SS
in 24
hour notation.
Note
: The clock is used to print a timestamp on the receipt when a batch
is delivered.
DATE
95
Enter the correct date of the system clock. The format in which the date is
to be entered has been defined in
SETUP
87.
PASS CODE
96
All SETUP-values can be pass code protected. This protection is disabled
with value 0000 (zero). 4 digits can be programmed, for example 1234.
TAGNUMBER
97
For identification of the unit and communication purposes, a unique tag
number of maximum 7 digits can be entered.
