Fluidwell F132-P, Руководство по эксплуатации

Страница: 8 / 40

HF132PEN_v0501_05
Page 8
Fig. 4: Example display during programming preset value.
Note that a PRESET-value will be used time after time until a new value is accepted. Please
note that changes will only be accepted after
ENTER
has been pressed briefly!

Batch maximum
When you program a new value which is too large to fit on the display (see chapter 3,
decimals) the arrow-down symbol

will be displayed while programming; the new value will
not be accepted!

Starting up a batch process
A new batch process can only be started when
READY
is displayed. The batch process is
started by pressing
START
. Depending on the SETUP-settings, one or two output valves will
be energized, the batch starts and the
RUN
indicator lights up. An arrow on the display
indicates if the ACTUAL-value is / was counting up or down.
Fig. 5: Example display during batch processing.

Interrupting and ending the batch process
When
STOP
is pressed once, the batch process will be temporarily interrupted; the actual
values are not lost. On the display, the
PAUSE
indicator will flash. From this stage, the batch
process can be resumed with the
START
key.
The process can be ended entirely at all times by pressing
STOP
twice, in which case the
actual values are "lost" and the system returns to steady state: the batch cannot be resumed.
Fig. 6: Example display with batch paused.
When a batch has completed the display shows
READY
and one receipt will be printed automatically.
The following functions are now available:

Display accumulated total
With
READY
displayed, press ► once to display
TOTAL
and
ACC. TOTAL
(accumulated total).
The value will count up to
99,999,999,999
. The unit and number of decimals are displayed
according to the configuration settings for preset.
When the value is too large to display, the readout changes to
-------
. The maximum
number to display can be changed with the decimals function, as described in chapter 3.
RUN PAUSE LOW BATTE RY SET-UP ALARM PROGRAM READY
RUN PAUSE SET-UP ALARM PROGRAM READY
RUN PAUSE LOW BATTE RY SET-UP ALARM PROGRAM READY