fluidra ASTRALPOOL 78572, Инструкция по установке и эксплуатации

Страница: 22 / 40

19
The fault name
Fault code
Fault time
day - month - year
hour:min
4.Operationanduse
4.2.5 History of the fault
In the main interface click fault display key, interface displays as follows:
If no failure, main interface displays static " "
When fault occurs,the fault icon will flash between the " " " ",
the failure interface will record time, code, name of the fault.
After troubleshooting, if you do not check the failure record,
the main interface will display static " "; if you check the
failurerecord, the main interface will displays static " ";
Failure record is in reverse order,according to the happening time.
Press the "Clean" key,you can delete the fault record.
4.2.6 Color Display Calibration
Keep click quickly at the blank area on any interface till you hear a long
beep. Then you will enter the calibration interface. Click "+" to start
calibration.When you hear the beep again, you will finish
calibration and exit.
Remark: the wire controller can display the temperature unit as "
℉
" or
"
℃
" according to the unit model you bought.