fluidra ASTRALPOOL 78572, Инструкция по установке и эксплуатации

Страница: 17 / 40

4.Operationanduse
4.2 Color screen wire controller function introduction
4.2.1
Booting and shutdown
As shown in figure 1.1:
In shutdown status, click
①
then the unit will be booted
In booting status, click
①
then the unit will be shut down.
4.2.2
Mode switch and target temperature Setting
2.2 1 Mode switch
In the main interface, click mode button or inlet water temperature setting
button, interface displays as follows:
②
③ ④ ①
Click the refrigeration mode button
①
, automatic mode button
②
or
heating mode button
③
then you can select the corresponding mode.
Note: when the unit is designed for single automatic mode or single
thermal mode, the mode can not be switched.
2.2.2Target temp. setting
Clice the temperature set button
④ ，
you can set the target temperature.
14