Videomesh
TM
Hardware Set-up
A Videomesh
TM
2200 is a product designed for outdoor operations in harsh
environments. The waterproof enclosure contains a 35W transformer that is
used to power the Videomesh
TM
internal board and any other equipment that
needs to be installed inside the enclosure, such as one or more video-servers.
Proper Installation Procedures
The unit can be installed on a wall or it can be pole-mounted. Brackets to install
the unit on a wall are sold with the unit. Other types of mounting kits, such as
pole-mounting kits, can be bought separately from Fluidmesh Networks’ dealers.
Make sure to buy the proper mounting kit to safely install every Videomesh
TM
unit.
In order to prevent excessive heating of the unit beyond the operational
temperature, Fluidmesh Networks manufactures and sells through its dealers a
Videomesh SunShield
. In case any Videomesh unit must stay under direct solar
radiation for long periods of time, you are strongly encouraged to buy and install
a Videomesh
SunShield
for the unit to avoid overheating.
Powering the Videomesh
TM
The unit comes with an internal 35W AC-to-DC transformer. The transformer is
used to power the Videomesh
TM
internal board and it can be used to power other
electrical equipment that needs to be installed inside the enclosure, such as a
video-servers. You are provided with a copy of the transformer specifications
within the Videomesh
TM
documentation. In case you want to use the transformer
9
35W AC-DC
transformer
AC 100-240V
50/60Hz
power input
Water-tight
glands for
Ethernet and
coax cables
Reset factory-
default
settings (keep
it pressed for
more than 15
seconds)
12 V DC
outputs for up
to two video-
servers
Auxiliary AC
Power Output
Ethernet
Interface 0
Ethernet
Interface 1