Web-based Interface and Configuration
The Videomesh can be configured using a web-based graphical user interface
(GUI).
Initially every Videomesh is configured in
camera/relay mode
and it can be
configured attaching a computer to the Videomesh
TM
using an Ethernet
crossover cable.
Logging into the web-based interface
Attach an Ethernet crossover cable with RJ45 connectors between a computer
and the Videomesh that you want to configure using the first Ethernet port of the
Videomesh. If your computer is configured to receive the IP address from a
DHCP server, it should receive immediately an IP address.
In case your computer is not configured to receive an IP address automatically,
go to the troubleshooting section where you can learn how to perform a manual
IP configuration of your computer.
Disable the
Access the Internet using a proxy server
function. To disable this
function, go to
Control Panel > Internet Options > Connections > LAN
Settings
and uncheck the enable box.
Open a web-browser such as Internet Explorer and type the following URL:
http://1.0.0.1
Make sure you do not omit the initial “http://”. Some browsers might not work is
you do not write “http://” in front of numeric addresses.
At this point you should get a login-form asking a user name and a password.
The default settings are the following:
Username: admin
Password:
admin
14
