Flowserve 6LR-18A, Руководство пользователя

Страница: 61 / 116

GEI 56128-L
© Copyright 2016 General Electric Company
15
VII. FAILURE
WARNING: An extreme overload or electrical failure may result in heating or arcing which can
cause the insulation to give off noxious fumes. All power should be removed from the motor
circuit as a precaution even though the circuit has overload protection. Personnel should not
approach the motor until adequate ventilation of the area has purged the air of fumes. When covers of a motor
are removed after a failure, care should be observed to avoid breathing fumes from inside the motor. Preferably,
time should be allowed for the motor to cool before attempting any examination or repair.
WARNING: Water should not be applied to any electrically energized equipment because electric
shock could result in serious or fatal injury. In case of fire, disconnect all power and use a carbon
dioxide extinguisher to quench the flame. Before operating any motor after a suspected failure,
it should be inspected for damage.
VIII. REPAIR
If a motor is marked with IECEx or ATEX designation and repairs are required, the motor must be repaired by
operators trained in the understanding of BS/EN 60079-1 and BS/EN 60079-15 standards. The motor has been
designed to meet the rigid requirements of these standards. Repair or alteration of the motor may result in the motor
no longer meeting the requirements of these standards. If major repairs are undertaken (such as rewinding a stator),
proper facilities should be made available and suitable precautions observed.
Recommended tightening torques for various parts is listed in Tables 4A and 5B below.
WARNING: When burning off old insulation materials or when welding near insulation during
rewinding, adequate ventilation must be provided to avoid exposing personnel to noxious fumes.
Combustion of exhaust must be complete and adequately vented to the outside atmosphere in
compliance with acceptable standards.
Exposure of personnel to air-borne inorganic fibers must be avoided by adequate ventilation or by wetting the
remaining insulation components following the burning of the organic materials
.
IX. RENEWAL PARTS
The use of only GE Energy renewal parts is recommended. When ordering, specify the model number and the serial
number of motor (complete nameplate data is desirable). Specify quantity and describe the part.
For information and service, refer to the nearest GE Energy Sales Office or a GE Energy Authorized Service Shop.
X. PART OR COMPONENT DISPOSITION
Once a component reaches its end of life, that component should be disposed of in accordance with country / local
rules and regulations.