MN301905 Rev A
81
|
Appendix (continued)
Step Ten
PIN
This function allows the sensor configuration to be
locked via a preset PIN.
Note: This function should only
be performed by a trained technician.
DISTANCE ADJUSTMENT
This function allows the factory set distance of a measured value to be adjusted.
Note: This function should only be performed by a trained technician. Never
change this setting unless instructed by a Flowline representative. Be sure to
record this setting if a Factory reset is performed.
THRESHOLD
This function allows the factory set echo threshold to be adjusted.
Note: This
function should only be performed by a trained technician.
INFORMATION
This function displays basic information about your
sensor including sensor type, serial number, date of
manufacture and software version.
