|
32
MN301905 Rev A
Configuration
(with Display, continued)
Step Five
CHANGING DISPLAY VALUES
The numeric values are set using the
Right Arrow
and
Up Arrow
buttons. Press the
Right Arrow
button to
select the next digit and the
Up Arrow
button to increment the digit value. The digit being changed is
highlighted. Press the
Enter
button to accept a setting or the
Esc
button to exit without saving changes. The
below exercise illustrates how to change the value of an Empty configuration. Follow the steps to change the
setting from 10.00 ft to 12.00 ft. This example applies to all functional settings starting from the Main Menu.
1) From the Main Menu, press
ENTER
to advance into
the Configuration menu.
a) Sensor Height will appear on the top line of the
screen.
2) From Sensor Height, press
ENTER
.
a) The “
+
” sign will be highlighted on the screen.
b) This is the adjustment for the percentage setting.
3) Press
ENTER
to move down to the distance setting.
a) The first digit, “
1
”, will be highlighted.
4) Press
Right Arrow
to move one digit to the right.
a) Use the
Right Arrow
button to move the digit
one space to the right.
b) Pressing
Right Arrow
on the last digit will jump
back to the first digit.
5) Press
UP ARROW
to increase the digit from “
0
” to
“
1
”.
6) Press
UP ARROW
to increase the digit from “
1
” to
“
2
”.
a) Use the
UP ARROW
button to increase the digit
by one unit.
b) After “
9
”, the display will jump back to “
0
”.
7) Press
ENTER
to accept the setting as 12.00.
8) Press
ESCAPE
to move back to the Main Menu.
