flowair Rooftop Cube, Руководство пользователя

Страница: 35 / 59

www.flowair.com
| 35
2.7. Heat recovery unit installation Cube 80/100 L i Cube 120/160 R
For Cube 80/100 L and Cube 120/160 R units, a rotational heat recovery exchanger is delivered as a separate module. Installation
is based on horizontal connection of the heat recovery module to the device, the upper part of the heat recovery module should
be slid under the edge of the device’s roof [1].
1.
Installation is done by means of four provided screws [2]. The bottom part of the module frame should be tightened to the unit’s
frame with two M8 screws on each side of the frame.
2.
It is unacceptable to assemble the module together with the device prior to transporting the whole device to the roof
on site. It’s important to note that The screws transfer only the static load of the heat recovery module.