Page 62 of 64
versatile™ 4C Maintenance Manual—206367—Rev A
www.florencemailboxes.com
Replacement of Number Decal and Parcel-Key Tags
versatile™ 4C mailbox suites
REQUIRED TOOLS
PERMANENT FINE-TIPPED PEN
1 .
Remove the existing number decal from the
door and clean any remaining adhesive
from the surface.
2 .
Remove the adhesive cover on the back
of the new number decal and place the
appropriate number decal in the door
emboss.
NOTE: If you desire to use decals other than provided, you can order different
numbers from an Authorized Florence Dealer. Decals are available
in any combination of letters and numbers with a maximum of 5
characters.
PART #
DESCRIPTION
86159
PARCEL LOCKER ID TAGS (3 TAGS) (incl in K86160)
86160-3
PARCEL LOCKER ID TAG HOLDERS (3 KEY RINGED TAG HOLDERS) (incl in K86160)
K91514
NUMBER DECAL KIT
K86160
3 CLEAR KEY TAGS W/CARDS KIT
NOTE: Florence recommends cleaning the doors and cabinet with a soft
cloth dampened with any mild detergent or properly-diluted
biodegradable, water-based cleaner such as Simple Green™.
The use of petroleum-based solvents, ammonia, harsh abrasive
cleaners,or scrubbing sponges is NOT recommended, as this may
damage the door surface.
REFER TO P. 7 FOR COMPLETE CLEANING RECOMMENDATIONS.
NOTE: To adhere to USPS regulations, numbering should go lowest to highest
from top left to bottom right.
3 .
For each of the three (3) key tags per door
(
86159
), clearly print the corresponding
door number in the space indicated on the
tag of the replacement key.
4 .
Check key operation for the door and place
the marked key tags (
86159
) in each of the
corresponding plastic key rings (
86160-3
)
as indicated.
Confidential & Proprietary for Florence and Clients Only -- Do Not Distribute