Florence Versatile 4C06D-02 Скачать руководство пользователя

Страница: 58 / 64

Page 58 of 64

versatile™ 4C Maintenance Manual—206367—Rev A

www.florencemailboxes.com

Replacement of Center or Bottom Shelf

versatile™ 4C mailbox suites

REQUIRED TOOLS

1/8” DRILL BIT
PLASTIC MALLET
PNEUMATIC BLIND RIVET GUN
PORTABLE DRILL
TOOLS FROM EARLIER STEPS

1 .

Open the master door(s) using procedures

on pp. 8–13.

2 .

If the shelf being replaced is not riveted

in place, proceed to Step 3. If the shelf is

riveted in place:

Remove the 4C mailbox module from the
wall or enclosure using procedures on
pp. 14–15.

Using a 1/8” drill bit, drill out 1/8”
dia x 0.337” SS blind rivets (

86098

)

holding the shelf in place.

3 .

Using a plastic mallet, apply force

underneath the shelf to be removed,

dislodging it from the metal snaps holding it

to the insert panel.

PART #

DESCRIPTION

86051M

CENTER OR BOTTOM SHELF

86098

1/8” DIA X 0.337” SS BLIND RIVET

NOTE: Some front-loading module shelves are riveted in place for strength

and/or security. Up to five (5) 1/8” dia x 0.337” SS blind rivets

(86098) per shelf must be removed from below the shelf before

replacing the shelf. This will require removing the module from the wall

(see pp. 14–15).

NOTE: This procedure will require opening the master door(s). Contact local

postal officials to gain access to units serviced by the USPS.

4 .

To replace the shelf, place it above the metal

snaps, align it front to back, and apply force

with a plastic mallet to snap the shelf back

into place.

5 .

If the original shelf was riveted in place:

Resecure the shelf with 1/8” dia x
0.337” SS blind rivets (

86098

) and

reattach the insert panel to the slide
housing for dbl column modules.

6 .

Reinstall the module in the wall or enclosure

using procedures on pp. 14–15.

7 .

Close the master door(s) and lock the

master-access door using procedures on

pp. 8–13.

Confidential & Proprietary for Florence and Clients Only -- Do Not Distribute

Содержание Versatile 4C06D-02
































































Результаты поиска

Содержание Versatile 4C06D-02

Отзывы:

Похожие инструкции для Versatile 4C06D-02

Бренды по названию

Популярные бренды

Florence Versatile 4C06D-02, Руководство по обслуживанию

Результаты поиска

Содержание Versatile 4C06D-02

Отзывы:

Похожие инструкции для Versatile 4C06D-02

Бренды по названию

Популярные бренды