Page 38 of 64
versatile™ 4C Maintenance Manual—206367—Rev A
www.florencemailboxes.com
Replacement of Tenant Compartment Door
versatile™ 4C mailbox suites
1 .
Open the master door(s) using procedures
on pp. 8–9.
2 .
Remove the 4C mailbox module from the
wall or enclosure using procedures on
pp. 14–15.
3 .
For tenant or tenant-with-parcel modules,
disengage the hold-open arm(s) from the
top of the master door(s) using procedures
on pp. 16–17.
4 .
Remove the hinge rod only as far as needed
to remove the affected tenant door using
procedures on pp. 32–33.
5 .
Replace the tenant compartment door.
6 .
Reinstall the hinge rod using procedures on
pp. 32–33.
PART #
DESCRIPTION
VARIES
TENANT COMPARTMENT DOOR (Contact authorized Florence dealer or customer
service representaive)
CAUTION: Once the hinge rod is removed, the doors can fall out,
potentially causing injury. Ensure that each of the doors is in the
locked position before removing the hinge rod.
NOTE: This procedure will require opening the master door(s). Contact local
postal officials to gain access to units serviced by the USPS.
REQUIRED TOOLS
TOOLS FROM EARLIER STEPS
7 .
For tenant or tenant-with-parcel modules,
reattach the hold-open arm(s) using
procedures on pp. 16–17.
8 .
Reinstall the module in the wall or enclosure
using procedures on pp. 14–15.
9 .
If you are reusing an existing lock, install the
tenant-lock assembly.
• For single-high tenant lock, use
procedures on pp. 34–35.
• For multi-high compartments with
standard tenant lock, use procedures on
pp. 36–37.
10 .
Close the master door(s) and lock the
master-access door using procedures on
pp. 8–9.
Confidential & Proprietary for Florence and Clients Only -- Do Not Distribute