switched off.
Always disconnect the
plug from the mains
prior to maintenance
work or if the power
cable is damaged.
Noise level ratings L
WA
in dB(A).
Protection Class II
Electrically powered
implements must not
be disposed of with
the domestic waste
。
Caution with steps!
Turn off the power
when the implement
is to be carried
across steps.
Remove any soil residue
from the springs of the
impact protection cover
and/or the housing to
ensure that the cover closes
correctly. When operating
without the collection
basket, the impact
protection cover must be
completely closed.
Transport and
working
positions
General notes on
safety
This implement can
cause serious injuries if
it is not properly used.
Please read these
O
perating Instructions
carefully and familiarize
yourself with all the
control elements
before operating this
implement.
and firm shoes with
nonslip soles, strong long
trousers, ear defenders
and goggles. Never
operate the implement
while bare footed or
when wearing open
sandals.
The protective devices
and your personal
protective equipment will
protect yourself and other
people and ensure that
the equipment can be
smoothly operated.
• Neve
r operate the
implement if it is
damaged, incomplete or
has been modified
without the consent of the
manufacturer. Never work
with damaged or missing
protective devices (e.g.
starting lever, unlocking
knob, impact protector).
Never disengage
protective devices (e.g. by
tying the starting
lever).This ensures that the
equipment remains safe.
• Be
fore starting the
equipment, ensure that no
objects or branches are
pushed into the blade
opening, that the
equipment is standing
stably and that the
workspace is tidy and not
blocked.
Check the condition of
your extension cable and
the connecting cable of
your equipment. Use the
necessary protective
equipment. There is a risk
of injury.
• I
f your equipment vibrates
or emits unusual noises
when switched on,
disconnect the plug from
the socket and check the
cutting cylinder. Ensure
that no remains of
chopped matter are
blocking the cutting
cylinder or jammed
10
B
G
E
R
I
and firm shoes with
nonslip soles, strong long
trousers, ear defenders
and goggles. Never
operate the implement
while bare footed or
when wearing open
sandals.
The protective devices
and your personal
protective equipment will
protect yourself and other
people and ensure that
the equipment can be
smoothly operated.
• Neve
r operate the
implement if it is
damaged, incomplete or
has been modified
without the consent of the
manufacturer. Never work
with damaged or missing
protective devices (e.g.
starting lever, unlocking
knob, impact protector).
Never disengage
protective devices (e.g. by
tying the starting
lever).This ensures that the
equipment remains safe.
• Be
fore starting the
equipment, ensure that no
objects or branches are
pushed into the blade
opening, that the
equipment is standing
stably and that the
workspace is tidy and not
blocked.
Check the condition of
your extension cable and
the connecting cable of
your equipment. Use the
necessary protective
equipment. There is a risk
of injury.
• I
f your equipment vibrates
or emits unusual noises
when switched on,
disconnect the plug from
the socket and check the
cutting cylinder. Ensure
that no remains of
chopped matter are
blocking the cutting
cylinder or jammed
body positions and
always keep your
balance, so that you
continually have a sure
footing on slopes. Always
work across slopes - never
up and down! Be
particularly careful when
changing the travelling
direction.
Do not work on very
steep slopes. This enables
you to control the
equipment better in
unexpected situations.
• Do no
t run! Always guide
the implement at a
walking pace with both
hands on the handle. Be
especially careful when
you turn the implement
around or draw it
towards you. Danger of
stumbling!
•
Start or actuate the
starting lever with care
and in conformity with the
directions in these
Instructions.
• Do no
t tilt the implement
when starting, other than
it has to be lifted. In this
case tilt the implement
only to the extent that is
absolutely necessary and
always lift the implement
on the side that is
opposite to the operator.
• Neve
r operate the
implement without the
attached collection bag or
impact protector. Danger
of injury! Always keep
well away from the
ejector opening.
• Do no
t operate the
implement in the vicinity
of inflammable liquids or
gases as this could give
rise to the danger of a fire
or explosion.
•
Always disconnect the
plug from the mains
socket before any
maintenance.
body positions and
always keep your
balance, so that you
continually have a sure
footing on slopes. Always
work across slopes - never
up and down! Be
particularly careful when
changing the travelling
direction.
Do not work on very
steep slopes. This enables
you to control the
equipment better in
unexpected situations.
• Do no
t run! Always guide
the implement at a
walking pace with both
hands on the handle. Be
especially careful when
you turn the implement
around or draw it
towards you. Danger of
stumbling!
•
Start or actuate the
starting lever with care
and in conformity with the
directions in these
Instructions.
• Do no
t tilt the implement
when starting, other than
it has to be lifted. In this
case tilt the implement
only to the extent that is
absolutely necessary and
always lift the implement
on the side that is
opposite to the operator.
• Neve
r operate the
implement without the
attached collection bag or
impact protector. Danger
of injury! Always keep
well away from the
ejector opening.
• Do no
t operate the
implement in the vicinity
of inflammable liquids or
gases as this could give
rise to the danger of a fire
or explosion.
•
Always disconnect the
plug from the mains
socket before any
maintenance.
