and firm shoes with
nonslip soles, strong long
trousers, ear defenders
and goggles. Never
operate the implement
while bare footed or
when wearing open
sandals.
The protective devices
and your personal
protective equipment will
protect yourself and other
people and ensure that
the equipment can be
smoothly operated.
• Neve
r operate the
implement if it is
damaged, incomplete or
has been modified
without the consent of the
manufacturer. Never work
with damaged or missing
protective devices (e.g.
starting lever, unlocking
knob, impact protector).
Never disengage
protective devices (e.g. by
tying the starting
lever).This ensures that the
equipment remains safe.
• Be
fore starting the
equipment, ensure that no
objects or branches are
pushed into the blade
opening, that the
equipment is standing
stably and that the
workspace is tidy and not
blocked.
Check the condition of
your extension cable and
the connecting cable of
your equipment. Use the
necessary protective
equipment. There is a risk
of injury.
• I
f your equipment vibrates
or emits unusual noises
when switched on,
disconnect the plug from
the socket and check the
cutting cylinder. Ensure
that no remains of
chopped matter are
blocking the cutting
cylinder or jammed
body positions and
always keep your
balance, so that you
continually have a sure
footing on slopes. Always
work across slopes - never
up and down! Be
particularly careful when
changing the travelling
direction.
Do not work on very
steep slopes. This enables
you to control the
equipment better in
unexpected situations.
• Do no
t run! Always guide
the implement at a
walking pace with both
hands on the handle. Be
especially careful when
you turn the implement
around or draw it
towards you. Danger of
stumbling!
•
Start or actuate the
starting lever with care
and in conformity with the
directions in these
Instructions.
• Do no
t tilt the implement
when starting, other than
it has to be lifted. In this
case tilt the implement
only to the extent that is
absolutely necessary and
always lift the implement
on the side that is
opposite to the operator.
• Neve
r operate the
implement without the
attached collection bag or
impact protector. Danger
of injury! Always keep
well away from the
ejector opening.
• Do no
t operate the
implement in the vicinity
of inflammable liquids or
gases as this could give
rise to the danger of a fire
or explosion.
•
Always disconnect the
plug from the mains
socket before any
maintenance.
body positions and
always keep your
balance, so that you
continually have a sure
footing on slopes. Always
work across slopes - never
up and down! Be
particularly careful when
changing the travelling
direction.
Do not work on very
steep slopes. This enables
you to control the
equipment better in
unexpected situations.
• Do no
t run! Always guide
the implement at a
walking pace with both
hands on the handle. Be
especially careful when
you turn the implement
around or draw it
towards you. Danger of
stumbling!
•
Start or actuate the
starting lever with care
and in conformity with the
directions in these
Instructions.
• Do no
t tilt the implement
when starting, other than
it has to be lifted. In this
case tilt the implement
only to the extent that is
absolutely necessary and
always lift the implement
on the side that is
opposite to the operator.
• Neve
r operate the
implement without the
attached collection bag or
impact protector. Danger
of injury! Always keep
well away from the
ejector opening.
• Do no
t operate the
implement in the vicinity
of inflammable liquids or
gases as this could give
rise to the danger of a fire
or explosion.
•
Always disconnect the
plug from the mains
socket before any
maintenance.
the implement repaired
by an authorised
workshop!
•
Store the implement in a
dry place well out of
reach of children.
CAUTI
O
N! The
following states how
to avoid damage to the
implement and any
resulting harm to
people:
Take care of your
implement:
•
Switch off the power
when the implement is to
be carried across steps.
• In
spect the implement
each time before it is to
be used. Never operate
the implement if safety
devices (e.g. impact
protector, parts of the
cutting facility or bolts)
are missing, worn out or
damaged.
Check especially the
power cable and starting
lever for damage.
To avoid imbalance, all
tools and bolts must be
exchanged as complete
sets.
• On
ly use spare parts and
accessories that have
been supplied or
recommended by the
manufacturer. The use of
alien parts results in the
immediate loss of all
guarantee claims.
• En
sure that all nuts, bolts
and screws are firmly
tightened and that the
implement is in a safe
working state.
• Neve
r try to repair the
implement yourself, unless
you have been trained
accordingly. All work that
has not been listed in
these Instructions must
only be carried out by
authorised servicing
14
B
G
E
R
I
the implement repaired
by an authorised
workshop!
•
Store the implement in a
dry place well out of
reach of children.
CAUT
ION
! The
following states how
to avoid damage to the
implement and any
resulting harm to
people:
Take care of your
implement:
•
Switch off the power
when the implement is to
be carried across steps.
• In
spect the implement
each time before it is to
be used. Never operate
the implement if safety
devices (e.g. impact
protector, parts of the
cutting facility or bolts)
are missing, worn out or
damaged.
Check especially the
power cable and starting
lever for damage.
To avoid imbalance, all
tools and bolts must be
exchanged as complete
sets.
• On
ly use spare parts and
accessories that have
been supplied or
recommended by the
manufacturer. The use of
alien parts results in the
immediate loss of all
guarantee claims.
• En
sure that all nuts, bolts
and screws are firmly
tightened and that the
implement is in a safe
working state.
• Neve
r try to repair the
implement yourself, unless
you have been trained
accordingly. All work that
has not been listed in
these Instructions must
only be carried out by
authorised servicing
