18
5.
Installing the Pedestal and
Charging Station
Follow the steps below to install the pedestal and the charging station:
1.
Slide the pedestal over the assembly, ensuring that the terminal blocks are facing the access door at
the bottom of the pedestal. Tighten the 4 mounting nuts that secure everything to the anchor (max.
torque: 36 LB-FT [50 N-M]).
2.
Connect the ground cable from the non-isolated (ground) terminal
on the cascading station to the pedestal ground terminal.
3.
Unscrew and remove the back plate(s) from the top of the pedestal, depending on the number and
location of the charging stations to be installed.
4.
Pass the power supply wires, 2 lines, and 1 ground connector from each rectangular hole at the top of
the pedestal down to the breakers.
NOTE
that if you have a side-by-side installation, you must ensure that you have completed the
charger mount installation before you start the wiring.
Ground cable
connection
Содержание CoRe+
Страница 1: ...1 x Pedestal and Cable Management System Installation Guide TM ...
Страница 8: ...8 3 1 2 Dimensions The image below shows the dimensions of the pedestal ...
Страница 24: ...24 Measurements for the CoRe MAXon a Wall Mounted Installation ...
Страница 47: ...47 9 2 Multiple Pedestals Multiple Devices on Separate Electrical Circuits Grounding ...