FLIR ThermaCAM B2, Руководство пользователя

Страница: 95 / 192

10.4 Menu system
10.4.1 Navigating the menu system
■
Press MENU/YES to display the vertical menu bar
■
Press MENU/YES to confirm selections in menus and dialog boxes
■
Press PWR/NO to exit the menu system
■
Press PWR/NO to cancel selections in menus and dialog boxes
■
Press the navigation pad up/down to move up/down in menus, submenus and di-
alog boxes
■
Press the navigation pad right/left to move right/left in menus and submenus, and
to change values in dialog boxes
10.4.2 Meas. mode
10429603;a2
Figure 10.8 Meas. mode dialog box
Figure 10.9 Explanations of the Meas. mode dialog box
Explanation Value Label
■
Select None to disable the measurement mode.
■
Select Spot to lay out a spot, where the temper-
ature of the spot will be displayed in the result
table.
■
Select Area max to lay out an area on the
screen, where the maximum temperature in the
area will be displayed in the result table.
■
Select Area min to lay out an area on the
screen, where the minimum temperature in the
area will be displayed in the result table.
■
Select Area avg to lay out an area on the
screen, where the average temperature in the
area will be displayed in the result table.
■
Select Diff spots to calculate the difference
between two spots and display this difference
in the result table.
■
None
■
Spot
■
Area max
■
Area min
■
Area avg
■
Diff spots
Meas. mode
10
Publ. No. 1557882 Rev. a156 – ENGLISH (EN) – February 28, 2006
81
10 – Camera program