27.1
General
When you record a video clip or save an image, the camera stores the video or image file
on the memory card.
Note
Empty or use a memory card that has not previously been used in another type of
camera. The cameras may organize files differently on the memory card. There is there-
fore a risk of losing data if the same memory card is used in different types of cameras.
27.2
File-naming convention
The default naming convention for video and image files is FLIRxxxx.jpg, where xxxx is
an incremental counter.
It is also possible to save files with a prefix added to the filename, including the date and
the text “MOV_” for videos and “IR_” for images. However, these files may not automati-
cally be detected by third-party applications.
For more information, see the setting
File naming format
in section 23.4
27.2.1
Resetting the image counter
Note
To prevent image files being overwritten, the new counter value will be based on
the highest existing filename number in the image archive. To ensure that the counter is
reset to 0001, insert an empty memory card before resetting the counter.
To reset the numbering of the video/image filenames, do the following:
1. Push the navigation pad to display the menu system.
2. Select
(
Settings
) and push the navigation pad. This displays the
Settings
menu.
3. Use the navigation pad to select
Device settings
>
Reset options
>
Reset image
counter...
.
4. Push the navigation pad. This displays a dialog box.
5. To reset the counter, select
Reset
and push the navigation pad.
27.3
Image files
The camera saves an image file that includes all thermal and visual information. This
means that you can open an image file at a later time and, for example, change the color
palette, apply another image mode, and add measurement tools.
The image *.jpg file is fully radiometric and saved lossless, which enables full post-proc-
essing in image analysis and reporting software from FLIR Systems. There is also a reg-
ular *.jpg component (lossy) for convenient viewing in non-FLIR Systems software (e.g.,
Microsoft Explorer).
Note
• An image saved in
HSM
mode does not include all thermal information, meaning that
you can only change the color palette in post-processing.
• The camera can also be configured to save an extra low-resolution visual image as a
separate file. This can be convenient if you are not using a post-processing software.
Select
(
Settings
) >
Save options & storage
>
Photo as separate JPEG
=
On
.
• When the
Digital camera
image mode is selected, a high-resolution digital image is
stored when an image is saved. However, no thermal information is stored.
#T810411; r. AC/70277/70566; en-US
109
Содержание GF7 Series
