FLIR F-606-ID-N Скачать руководство пользователя страница 10

Страница: 10 / 62

427-0033-00-12 Version 110

February 2019

This document does not contain any export-controlled information.

Series ID Camera Installation

1.3.11

Cable Glands and Spare Parts Kit

The kit contains the two 3/4” cable glands and gland

seal plugs required for non-conduit installations.
The remaining parts included in the kit are:
•

a spare ground wire

•

a spare ground nut and lock washer

•

two spare power terminal block plugs

•

two spare terminal block plugs

•

four spare F-Series back cover screws

1.3.12

Cable Gland Seal Inserts

The camera comes with two 3/4” NPT cable

glands, each with a three hole gland seal

insert. Cables may be between 0.23" to 0.29"

OD. Up to five cables may be needed. Plugs

are required for any insert hole(s) not used.
If non-standard cable diameters are used, you

may need to locate or fabricate the

appropriate insert to fit the desired cable. FLIR

Systems, Inc. does not provide cable gland

inserts other than the inserts supplied with the

system.

Note

Insert the cables through the gland seal before terminating and connecting them. The terminated

connectors will generally not fit through the cable gland. If a terminated cable is required, make a

clean, singular cut in the gland seal to install the cable into the gland seal.

Camera Power

GPIO Alarm

Ethernet

Heater Power

Seal plugs

Ground

Lug

Содержание F-606-ID-N































































Результаты поиска

Содержание F-606-ID-N

Отзывы:

Похожие инструкции для F-606-ID-N

Бренды по названию

Популярные бренды

FLIR F-606-ID-N, Руководство по установке

Результаты поиска

Содержание F-606-ID-N

Отзывы:

Похожие инструкции для F-606-ID-N

Бренды по названию

Популярные бренды