FLIR Ariel Gen III CM-3304-11-I, Руководство пользователя и инструкция по установке

Страница: 71 / 128

65 September 4, 2017
Configuration and Operation
CM-3304/CM-3308 User and Installation Guide
A graph displays audio when is detected. Audio that is below the Sound Intensity Threshold is displayed in
green. When audio exceeds the defined threshold, it creates an audio event and is displayed in red.
Sound Intensity Threshold
Setting a low threshold (for example, 25) means that the camera is more sensitive to noise, which results
in more alerts (displayed in red). The setting depends on the situation and environment. If the scene is
located in a quiet place, it is possible to use lower threshold. A noisy location requires a higher threshold.
When selecting Record to Edge , the recording includes the audio track. OSD must be enabled on the
Events Source > Audio screen, as well as from the System > Basic Configuration > OSD screen, in order
to insert on-screen displays on clips and snapshots.
Note:
Recording must be enabled from the System > Events Handler > Recording Settings screen in order to
record audio.
To enable using audio
1. Select the Audio checkbox. By default, Audio is not enabled.
To set the audio level
1. Move the Sound Intensity Threshold slider to the desired level between 1-100.
To define the method to store a snapshot
1. See instructions in the Alarm section.
To record the event on the camera
1. See instructions in the Alarm section.
To enable sending an email notification
1. See instructions in the Alarm section.
To define OSD text
1. See instructions in the Alarm section.
To set the arming schedule
1. See instructions in the Alarm section.
9.3.1.5.3 Motion
The Events Source > Motion screen is used for:
·
Enabling and defining the motion zone area settings
·
Sending an alarm upon a motion event in the camera’s microSD card
·
Defining the method for storing a snapshot in the camera’s microSD card
·
Sending a snapshot of the event to an FTP server
·
Recording an event in the camera’s microSD card