FLIR Ariel Gen III CM-3304-11-I, Руководство пользователя и инструкция по установке

Страница: 62 / 128

September 4, 2017 56
Configuration and Operation
CM-3304/CM-3308 User and Installation Guide
9.3.1.4.6 IP Filter
The IP Filter screen is used for restricting access to the camera by allowing or denying specific IP
addresses. It is possible to filter up to 10 IP addresses. The options are Allow, Deny, or NONE (default).
Network > IP Filter Screen
To allow an IP address
1. From the Filter drop-down list, select Allow .
2. Check the Enable checkbox for each IP address for which you want to allow access.
3. Enter the IP address in the Address text box.
4. Click Save .
To deny an IP address
1. From the Filter drop-down list, select Deny .
2. Check the Enable checkbox for each IP address for which you want to deny access.
3. Enter the IP address in the Address text box.
4. Click Save .
9.3.1.4.7 DDNS
The DDNS (Dynamic DNS) screen is used for network access if you select PPPoE as the default network
connection. Before configuring the system to use DDNS, you must first register with a DDNS service
provider.
Network > DDNS Screen
To use DDNS
1. From the Enable drop-down list, select ON. The default is OFF .
2. From the Type drop-down list, select the DDNS service provider:
·
DynDNS: custom@dyndns.org (default)
·
No-IP: default@no-ip.com
·
Two-DNS: default@two-dns.de
·
FreeDNS: default@freedns.afraid.org
3. Enter the Host Name, User Name, and Password in the respective text box.