FLIR Ariel Gen III CM-3304-11-I, Руководство пользователя и инструкция по установке

Страница: 46 / 128

September 4, 2017 40
Configuration and Operation
CM-3304/CM-3308 User and Installation Guide
To set the zoom control
1. In the Zoom Control section, move the slider to the desired zoom between Wide (1.00) to Tele
(3.00).
To set Auto Focus
1. In the Focus Control section, click Start . Auto Focus is adjusted.
Note:
If the Auto Focus function does not produce a clear picture, do the following:
1. Click Reset in the Reset Lens section.
2. Click Start in the Focus Control section. The image refocuses.
3. Continue with the lens setup procedure.
To manually set the focus
1. In the Focus Control section, move the slider to the desired focus between Far (1) to Near (100).
2. From the Step drop-down list, select the number of steps to set the focus: 1, 2, 4, 8, 16, 32, 64, or
128.
To set the Zoom Trigger Control
1. In the Zoom Trigger Control section, from the Zoom Trigger drop-down list, select ON or OFF . This
setting determines if the camera will automatically focus itself after the zoom has been changed.
To revert to the previous settings (To reset the lens)
1. In the Reset Lens section, click Reset . The previous settings are restored.
Note:
After clicking the Reset button in the Reset Lens , it is necessary to click the Start button in
the Focus Control section to refocus the lens.