VIEWCOM/E MAX+ Web page
> To upgrade the firmware of VIEWCOM/E MAX+ or a detector board
16
6
To set up another board:
• Select
Go To
and click to select a board from the list.
• Repeat the previous steps
4
-
5
.
7
To load a configuration from the PC to the board:
• Choose
File
and
Open
the configuration file.
• Choose
Connect
>
Send Parameters
and confirm. The board becomes operational with the loaded
configuration.
8
To save a configuration file on the PC:
• Choose
File
>
Save as
.
• Define the location and name of the configuration file.
9
To exit VIP Setup Module, click the
Close
button.
To upgrade the firmware of VIEWCOM/E MAX+ or a detector board
1
Go to the Web page of VIEWCOM/E MAX+.
2
Click
Board Setup
.
3
Open VIP Setup Module for VIEWCOM/E MAX+ or a detector board.
4
Choose
Connect
>
Get Parameters
and confirm.
5
Choose
Connect
>
Send Firmware
.
6
Browse to select the firmware file.
7
Click
Program
.
The firmware is upgraded now. The board automatically restarts and becomes operational.
