Setup via keypad and monitor
> To assign an IP address
6
To assign an IP address
1
Select
Communication
>
Ethernet
.
2
Select
System IP
and
Subnet Mask
and type a new string to change these settings.
3
To connect to other networks: enter another value to set the
Default Gateway
.
4
To change the default port of the PC: select
TCP Port
. and enter a new value.
5
Press the
Escape
key.
To change the time interval for data retrieval
1
Select
Communication
>
Data Integration Interval
and use the
Arrow
keys (Interval range: off, 10, 20 or 30 s, 1,
2, 3, 5, 6, 10, 15, 30 or 60 min).
2
Press the
Escape
key.
To set the number of cameras connected to VIEWCOM/E MAX+
1
Select
Communication
>
Number of Cameras
and use the
Arrow
keys.
2
Press the
Escape
key.
Note:
Serial communication between VIEWCOM/E MAX+ and an external device is possible over the service
connector on the front panel of VIEWCOM/E MAX+. The Communication menu includes the settings
Baudrate
.
