FlinSlim Edge Solar Hybrid Inverter with In-Built Stabilizer
FLIN ENERGY
14
00
Exit setting mode
Escape
01
Output source priority:
To configure load power
source priority
Solar first
Solar energy provides power to the
loads as first priority.
If solar energy is not sufficient to
power all connected loads, battery
energy will supply power the loads at
the same time.
Utility provides power to the loads only
when any one condition happens: -
Solar energy is not available - Battery
voltage drops to either low-level
warning voltage or the setting point in
program 12.
Utility first (default)
Utility will provide power to the loads as
first priority.
Solar and battery energy will provide
power to the loads only when utility
power is not available.
SBU priority
Solar energy provides power to the
loads as first priority.
If solar energy is not sufficient to
power all connected loads, battery
energy will supply power to the loads
at the same time.
Utility provides power to the loads only
when battery voltage drops to either
low-level warning voltage or the
setting point in program 12.
02
Maximum charging current:
To configure total charging
current for solar and utility
chargers.
(Max. charging current =
utility charging c
solar charging current)
Available options in 3KVA model W/O MPPT:
20A
30A
40A
50A (default)
60A
70A
80A
02
Maximum charging current:
To configure total charging
current for solar and utility
chargers.
Available options in 3KVA model With MPPT:
20A
30A
