2. Operation (Restoration & Discharge)
PROGRAM MODE – SETTING
Select MODE1
Setting Screen per MODE
Input Set Voltage
Input Set Amperage
Input Set Time
Enter Key must be pressed with
each change of the above to save
changes
In Program Mode Only
Method : Restoration or Discharge
Pulse :
Restoration : Insert 1 ~ 6 by keypad
Discharge : Insert 1 ~ 2 by keypad
Restoration
Regeneration Charge
Discharge
C A U T I O N
Caution
You should check specification & conditions of used batteries before you input Set V, Set
A and Set Time for regeneration of batteries. Wrong set values will cause damages to
batteries due to over charge or other reasons.
.
41
