2. Operation (Restoration & Discharge)
MANUAL MODE - OPERATION
When you are viewing the log files under operation or saved, you can switch to “Graph
Screen” by screen touch, and return to information screen the same way.
This will be applied to Manual mode as well as Program Mode.
Check Set values
1
2
1
Select either Restoration or Discharge
from Xtender bottom menu to begin
programmed manual cycle.
If manual mode is programmed to
discharge battery select
“Discharge”, if manual mode is
programmed to regenerate battery
select “Restoration.”
2
Time will start counting when Restoration or Discharge starts operation, and total AH (Ampere
Hour) will be shown on the screen.
Screen Touch
Switchable to
“Graph
Screen”
Xtender Operation – SCREEN SWITCH
37