Flight Display Systems FD800JBOX VER RJ45, Инструкция по установке и эксплуатации

Страница: 11 / 40

MAN – FD800JBOX VER RJ45
J2 - HDMI
HDMI (High-Defi nition Multimedia Interface) defi nes the
protocol and electrical specifi cations for the signaling, pin-
out, electrical, and mechanical requirements of cable and
connectors used for transmitting High-Defi nition content.
The Type A HDMI connector (shown below) has 19 pins
with bandwidth to support all SDTV, EDTV, and HDTV
modes. The plug’s outside dimensions are 13.9 mm wide
by 4.45 mm high. There is no audio output available on
the HDMI cable.
ECS manufactures an HDMI cable that is terminated at
the factory. It is ordered as part number 600-19786-XXX,
where XXX is the length in inches for the desired cable.
1
2
5
6
9
10
13
14
17
18
3
4
7
8
11
12
15
16
19
HDMI Connector
Pin Number Signal Description
1 TMDS Data 2+
2 TMDS Data 2 Shield
3 TMDS Data 2-
4 TMDS Data 1+
5 TMDS Data 1 Shield
6 TMDS Data 1-
7 TMDS Data 0+
8 TMDS Data 0 Shield
9 TMDS Data 0-
10 TMDS Clock+
11 TMDS Clock Shield
12 TMDS Clock-
13 CEC Control
14 Reserved N.C. on Device
15 SCL DDC Clock
16 SDA DDC Data
17 DDC/CEC Ground
18 +5 V Power Power EDID/DDC
19 Hot Plug Detect
Revision:
Revision Date:
Page:
F
11
September 29, 2014