Flight Display Systems FD800JBOX VER RJ45, Инструкция по установке и эксплуатации

Страница: 33 / 40

MAN – FD800JBOX VER RJ45
Standard Moving Map Ground Screen
Airport Diagram
Moving Map Features and
Confi guration
The moving map functionality automatically begins once
the system completes its booting sequence. This will
be displayed on a bulkhead monitor using either the
HDMI or VGA output on the system. Once the system is
booted, the moving map pages can also be displayed
within the web browser as described in previous sections.
The moving map automatically cycles through all of the
enabled pages at a pre-determined time interval (default 7
seconds). Pages can be enabled or disabled based on an
individual customers taste (see confi guration sections).
Abbreviations
ADC Air Data Computer
ARINC Aeronautical Radio, Inc.
DTG Distance to Go
ETA Estimated time of Arrival
ETE Estimated Time Enroute
FMC Flight Management Computer
FMS Flight Management System
GAMA General Aviation Manufacturers Association
GNSS Global Navigation Satellite System
GMT Greenwich Mean Time
GPS Global Positioning System
N/C No Connection
OAT Outside Air Temperature
P/N Part Number
S/N Serial Number
TTG Time To Go
Features and Pages
Ground Pages
The three ground pages can be custom made by the
user. They will show up during boarding and taxi and will
stop showing once the aircraft reaches 100kts, or they
can be set to stay on during fl ight. Typically these pages
will contain company logos, cabin briefi ngs, or welcome
aboard messages. The images should match the
confi gured resolution of the FD800JBOX VER RJ45. Flight
Display Systems can assist with formatting these pages.
Airport Diagrams
The Airport Diagram page shows a chart of the airport,
and location of the aircraft. Over 600 airports are in the
database. This feature is only compatible with domestic
US Airports. This feature can be turned on or off.
Revision:
Revision Date:
Page:
F
33
September 29, 2014