Flight Display Systems FD800JBOX VER RJ45, Инструкция по установке и эксплуатации

Страница: 8 / 40

MAN – FD800JBOX VER RJ45
Rear View with Connectors
1. J1 – DB25 Male 28V DC Power, ARINC 429 and RS-
232 for FMS/GPS Data, audio, and FDS CMS interface
via CAN.
2. USB 2.0 x (4)
These ports can be used for a USB mouse/keyboard,
thumb drives, point and shoot cameras, and USB hard
drives when adding additional content or confi guring
the moving map system.
3. J2 – HDMI
This connector is used to output the moving map to
a bulkhead display with an HDMI input, HDMI video
converter, or an HDMI amplifi er/switch. Use a plastic
cable tie and the metal bracket to secure HDMI
connectors.
4. J3 – VGA
This connector is used to output the moving map
to a bulkhead display with a VGA input, VGA video
converter, or a VGA amplifi er/switch.
5. J4 – RJ45 #1
This RJ45 Connector is used to connect the
JetJukebox to the video streaming wireless solution;
the test Wi-Fi router or a permanently installed Wi-Fi
solution.
6. J5 – RJ45 #2
This RJ45 Connector is used to connect the
JetJukebox directly to a laptop to use a point to point
connection to load additional content.
Note* - The JetJukebox does not support playback of
content stored on cell phones and tablets plugged in
via USB at this time.
USB USB
J2
J1
J3
J4 J5
1
2 3 4 5 6