FlexRadio Systems FLEX-6300, Руководство по установке

Страница: 3 / 23

Page 3 © 2015 FlexRadio Systems, v1.0.2
Getting Started
Packaging and ATU Kit Contents
Remove the FLEX-6300 ATU Kit contents from the packaging and verify that the following items are
included before proceeding. Refer to the image below.

One (1) ATU assembly, FLEX-6300 ATU board

One (1) Long RG-316 MCX (micro coaxial) cable assembly, 5.2” (13.21 cm)

One (1) Short RG-316 MCX (micro coaxial) cable assembly, 2.7” (6.86 cm)

Four (4) Phillips screws with washers, M3 x 6mm

One (1) 12-pin dual sided jumper

One (1) TORX L wrench, T10 / T8

One (1) ATU serial number label with adhesive backing
Additional Required Tools
In addition to the provided TORX wrench, a #2 Phillips screwdriver is required.