Page 7
© 2015 FlexRadio Systems, v1.0.2
After removing the Middle and Rear Side Cover TORX screws, remove the two (2) 4-40 X ¼”
Rear Top
Cover
TORX screws
using the long portion of the “L” TORX wrench. Retain the Rear Top Cover TORX
screws for re-installation. (Image not provided).
Keep all removed screws from the previous de-installation steps separate for re-installation. These screws
are shorter than the previous set of screws removed from the FLEX-6300. When complete, the right side
of FLEX-6300 should look like the image shown below with the two sets of screws grouped separately.
NOTE: All top cover screws are removed too.
