Page 13
© 2015 FlexRadio Systems, v1.0.2
Connecting the MCX Cable Assemblies
On the Filter printed circuit (PC) board, locate the gold MCX connector labeled
ATU-OUT
adjacent to the
back of the radio. Connect the unconnected end of the short RG-316 MCX cable assembly to the
ATU-
OUT
MCX connector by carefully inserting it into the gold MCX “snap on” connector and pressing down
gently until it is completely seated as shown in the image below. Be careful not to disturb the ATU or
Filter inductor coils when installing the short RG-316 MCX cable assembly.
When the short RG-316 MCX cable assembly is properly installed, it should look like the image shown
below.
