Page 17
© 2015 FlexRadio Systems, v1.0.2
Reinstalling the FLEX -6300 Chassis Cover
After the ATU assembly is completely installed in the FLEX-6300, re-installation of the chassis cover will
complete the AUT installation. During the FLEX-6300 disassembly, there were two sets of screws
removed; a set of long and short screws. The set of long screws will be installed first.
Replacing the Chassis Cover
With both hands, grasp both sides of the top cover and gently place the cover on the radio as shown
below (one hand was removed to show the proper orientation of the chassis cover on the FLEX-6300). Do
not force or rock the cover from side to side as that may bend the side covers.
