Page 21
© 2015 FlexRadio Systems, v1.0.2
Reinstalling the Short Chassis Screws
Reinstall all three (3) 4-40 X ¼”
Middle and Rear Side Cover
TORX screws
located on the right side of the
FLEX-6300 using the long portion of the “L” TORX wrench.
Be careful
not
to cross-thread the screw and
over tighten the Middle and Rear Side Cover TORX screws.
Repeat this procedure for installing the TORX
Middle and Rear Side Cover screws on the left side of the FLEX-6300. The image below shows the removal
of the right Middle and Rear Side Cover TORX screws.
After reinstalling the Middle and Rear Side Cover TORX screws, install the two (2) 4-40 X ¼”
Rear Top
Cover
TORX screws
using the long portion of the “L” TORX wrench.
Be careful
not
to cross-thread the
screw and over tighten the Rear Top Cover TORX screws.
