manualshive.com logo in svg

FLETCHER Alfamacchine T-300, Инструкция по эксплуатации

Поделиться
Скачать
FLETCHER Alfamacchine T-300 Скачать руководство пользователя страница 4

2

TRANSLATION OF THE ORIGINAL INSTRUCTIONS (Keep for future reference)

Document Code 

Rev. 

Date saved 

Date printed

T300 - T350 - T400 ISTRUZIONI 

01 

14/07/2016 

14/07/2016

EN

 DANGER - WARNING

 

BEFORE USING THE MACHINE PLEASE READ THIS MANUAL CAREFULLY SO THAT YOU BECOME FAMILIAR 
WITH THE MACHINE, ITS ENVISAGED USE AND ANY RISKS ASSOCIATED WITH IT.

Q%,, "=!! !\>!
to get best machine performance in maximum safety while performing the operations described therein.
<!!!!\

 DANGER - WARNING

 

USE THE MACHINE SOLELY AND EXCLUSIVELY FOR THE USES INDICATED AND IN ACCORDANCE WITH THE 
RECOMMENDATIONS PROVIDED IN THIS MANUAL. NEVER TAMPER WITH IT, FORCE IT OR USE IT IN ANY 
INAPPROPRIATE MANNER.

1.  INTRODUCTION TO USE

1.1. 

HOW TO CONSULT THIS MANUAL AND THE SYMBOLS ADOPTED

P†#>J*=‡?>=;Jˆ†#>J*=‡D>%<;$B†$<*ˆ!\
<   ‰    !     !       ! 
accompanied by symbols and notes to highlight the presence of any hazards and indicate the safe use of the equipment. These 
!  "

 DANGER – WARNING: IMPORTANT INFORMATION CONCERNING GENERAL SAFETY.

 DANGER-CAUTION: highlights situations where careful and sensible actions are essential.

 NOTES: information of a technical nature.

Содержание Alfamacchine T-300

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды