16
TRANSLATION OF THE ORIGINAL INSTRUCTIONS (Keep for future reference)
Document Code
Rev.
Date saved
Date printed
T300 - T350 - T400 ISTRUZIONI
01
14/07/2016
14/07/2016
EN
2. INSTALLATION
2.1. STORAGE
<!! !\
<!!! !\
All parts of the machine subject to the risk of oxidation are protected with grease and protective sprays at the time of dispatch to prevent
oxidation caused by weather conditions.
In the case of prolonged inactivity the machine must be stored with all necessary precautions taken based on the location and expected
storage times:
1. Store the machine in an enclosed place.
2. Protect the machine from impact and stress.
3. Protect the machine from humidity and excessive temperature differences (refer to the table below).
4. Do not allow corrosive substances to come into contact with the machine.
5. Check that the pack has not been damaged and that it is perfectly dry.
`\ ! !
!k\
< ! ! !
transport and storage.
Ambient
temperature
Storage
temperature
Relative humidity
Atmospheric
pressure
-25 ÷^_Dj]÷]_^@
-25 ÷Dj]÷ 131@
0 ÷D÷ 131@
]__!D@
'_!^_D]_^@
'_!_D`@
5.9 m/s2 (0.6G) or higher 900 mbar or more
Avoid places where
there may be
unexpected changes
in temperature
which could lead
to the formation
of condensate or
freezing.
!j!\ \ \D !
!k\*!
! \
2.2.
CHECKS ON RECEPTION
NOTES
Administrative check
1. Crate number and number of packs.
2. Weight and size
\ D! !!!\<
!! \
4. Check correspondence between shipping document data and the order.
Technical check
1. Condition and intactness of packaging.
2. Check that the packaging shows no signs of visible damage caused during transport and handling operations.
All the above checks must be performed by inspection in the presence of the shipping agent’s delivery person. If any damage is noted
!!!!!!\
NOTES
In relation to the above prescriptions, the manufacturer informs the user that in compliance with current international and national
