2
SAFETY INSTRUCTIONS
WARNING: Certain safety precautions are required when using pneu-
matic tools to prevent injury to the user and others in the area. Read and
follow all these instructions.
It is the employer’s responsibility to enforce compliance with these
safety warnings and procedures by all who use this driver. Keep the
manual available so all employees have access to it and the opportunity
to review procedures periodically.
The purpose of the Pneumatic FrameMaster® and Pneumatic
FlexiMaster® is to insert Fletcher Framer’s Points and Flexible Framer’s
Points in wooden frames to secure the glazing, matboard, artwork and
backing material. It must not be modified or used for any other applica-
tion.
1.
Use Safety Glasses.
Safety glasses with rigid
side shields must be worn
by the operator of this
driver as well as all others
in the work area. See
Figure 1.
2.
Wear ear protection to
avoid possible hearing loss. See Figure 1.
3.
Always assume driver contains points. Do not point the driver at
yourself or others. DO NOT
drive a point freely in the air.
4.
Always hold the nose of
the driver tight against the
wooden frame before
operating the trigger. See
Figure 2.
5.
Use clean, dry regulated
compressed air at 70 to
100 PSI, (5 to 7 BAR). The system should include filter, pressure
regulator, and automatic oiler.
Figure 1
Figure 2
